ENDH Stem Kit
WARNING: Cancer and Reproductive harm - www.p65warnings.ca.gov
Introducing our new ENDH stem for MTB. A stem that can be used as a single crown traditional stem or as a direct mount DH stem. With stack heights getting higher and higher, we decided to engineer a stem that provides a 35mm rise, and takes up less steer tube. When changing stem lengths, you no longer need to remove the entire stem; just change to the longer or shorter mount set. That means no more forks falling out, and no need to realign the handlebars. 63.5mm wide clamping surface provides a great blend of stiffness and compliance.
Have a DH bike? The ENDH converts to a direct mount stem. As a DH stem, length options are 45 & 50, providing 18mm rise.
Enduro or downhill, take your pick; with performance and a sick look, the ENDH stem should be your next piece of hardware.
SPECIFICATIONS:
- Base clamp height 23.5mm
- Single crown steerer rise is 35mm (bottom of base to center of bars)
- DH Direct mount rise 18mm (bottom of base to handlebar center)
- ENDH system doesn’t require headset readjustment or handlebar realignment
- Single Crown reach lengths 37mm & 42mm
- Clamp Mounts are also sold separately
- 63mm handlebar clamp width provides better stability
- All three mount sizes work with DH direct mount top clamps
- DH Direct mount reach lengths 45mm & 50mm
- 173 Grams for 37mm, and 191 grams for 42mm
- Stems are available in Black, Red, Gold, Ice, Yoshikote, & Pewter
- Accommodates only 35mm handlebars
- 6061-T6 Aluminum
- Stainless Steel A4-70 tapered hardware with washers
- USA made in Chino, CA
- 1 year warranty
SHIPPING NOW!
Instructions and Parts Diagrams
Z
This stem is great and comfortable. As a taller rider being 6’1 and about 220lbs this stem allows me to be in a comfortable upright position allowing better leverage and stability on the bike. This stem is great for jumping , downhill, climbing and overall base miles. I highly recommend for bigger taller older MTB riders🤙
Thanks for the great review! We are stoked that you like the ENDH!
T
Great
H
This stem is beautiful and feels great. The mount can be a little tricky to get torqued without an extended hex socket, but u was able to get around this by hand tightening, mounting the bar mount and bars, straightening, then taking the bar mount off to get my hex socket in there and torque to spec.
D
Amazing fit and finish
V
Outstanding Quality
Performance Based
Bomb 💣 Proof Construction
Made In USA